Preparation of an MMT-Modified Hyperbranched Adsorbent and Its Application in the Selective Adsorption of Pb(II)

The P(IA-HBP-AA-AM)/MMT composite was successfully synthesized via in situ polymerization and characterized using FTIR, XRD, TGA, and other techniques. The material was then applied as an adsorbent for the removal of heavy metals from simulated mining-contaminated water (prepared based on the typical ionic composition of real mining wastewater). Static adsorption experiments revealed that P(IA-HBP-AA-AM)/MMT composite could efficiently remove Pb(II) from contaminated water, and the adsorption behavior was well described by the pseudo-second-order kinetic model and the Langmuir isotherm model. Thermodynamic analysis indicated that the adsorption of Pb(II) onto the P(IA-HBP-AA-AM)/MMT composite was an endothermic and spontaneous process. At pH = 4.5 and T = 45 °C, the maximum adsorption capacity obtained from model fitting was 249.38 mg/g. The material exhibited strong selectivity for Pb(II), even in the presence of competing metal ions such as Cd(II), Zn(II), Al(III), Fe(III), K(I), and Na(I). Moreover, after five adsorption-desorption cycles, it still retained approximately 90% of its Pb(II) removal efficiency. Furthermore, dynamic adsorption experiments showed that the saturation adsorption capacity of Pb(II) reached 178.7 mg/g, with a column utilization efficiency of approximately 41%. These findings demonstrate the promising potential of P(IA-HBP-AA-AM)/MMT composite for the removal of Pb(II) from mining-contaminated water.