Monitoring microscope performance in an imaging facility using OMERO-metrics

Microscopes are essential tools for discoveries on a scale invisible to the unaided human eye. The development of immuno-fluorescence followed by molecular biology techniques and fluorescent fusion proteins have revolutionised the use of optical microscopy in bioscience. The quality of the data produced is dependent upon the sample, its preparation and the instrument used. However, instruments can degrade over time without easily visible changes to the produced images and, in turn, negatively impacts results. By testing instruments and doing comparisons between results over time and between different instruments, problems can be highlighted and corrective action can be taken. Using small fluorescent beads the point spread function (PSF) of the microscope can be recorded and the image resolution measured. Beads were prepared in a concentration matched to the field of view size and dried onto coverslips and mounted on slides. The beads were then imaged as 3D Z-stacks of sufficient size to fully enclose the PSF of the system. This data was uploaded to OMERO and processed using OMERO-metrics, an OMERO plugin developed for this purpose. This paper summarizes the development of workflows and protocols to enable this process, presents the results obtained and demonstrates the detection of significant instrument issues.