Mechanical Properties, Hydration Mechanisms, and Microwave-Absorbing Properties of Alkali-Activated Blast-Furnace...

As a novel low-carbon material, alkali-activated materials (AAMs) can effectively mitigate the environmental burden caused by the cement industry, and their functional development can further enhance their additional commercial benefits. This study employed alkali-activated blast-furnace slag (AAS) as a matrix and incorporated steel slag (SS) as a functional component, and the compressive strength, workability, shrinkage characteristics, microstructure, and microwave-absorbing properties of SS-containing AAS were systematically investigated. The results show that although the low reactivity of SS impairs the compressive strength of AAS, it effectively reduces the setting rate of AAS. At an SS dosage of 50% (sample B-S50), the 28-day drying shrinkage of AAS reached a minimum value of 778 με. The dissolution and hydration of SS provide additional Ca²⁺ and OH^- for AAS, thereby effectively promoting the hydration of blast-furnace slag and facilitating the formation of C-(A)-S-H and N-A-S-H gels. Moreover, SS acts as a conductive functional component, enhancing the conductivity of AAS and enabling a minimum reflection loss of -29.47 dB with 0.53 GHz effective bandwidth at 20 mm thickness. After further modification with steel fibers, the thickness-dependence of the microwave-absorbing properties of AAS was reduced, allowing effective absorption across multiple thicknesses (5 mm, 15 mm, and 25 mm). This study offers new insights into the high-value utilization of low-reactivity industrial solid waste and offers design methods for its functional development.