Interfacial Compatibility and Performance Evaluation of Waste Plastic Aggregate in SBS-Modified Asphalt Mixtures...

Waste plastic aggregate (WPA) is a promising recycled material for asphalt mixtures, but its polymeric surface can weaken binder adhesion and increase moisture-related damage, even in SBS-modified systems. Therefore, a clear need exists to identify anti-stripping agents that are compatible with WPA, rather than simply increasing WPA content in asphalt mixtures. This study evaluates the interfacial and mixture-scale performance of SBS-modified asphalt mixtures containing two WPA types, namely coarse WPA and fine WPA, treated with three liquid anti-stripping agents: amine-based agent (AS-Am), organosilane coupling-type adhesion promoter (AS-OS), and ester/surfactant-based wetting agent (AS-Es). The novelty of this study lies in selecting the anti-stripping system based on WPA-binder adhesion compatibility and validating it through moisture, rutting, rheological, and fracture performance. Binder bond strength, tensile bond strength, shear bond strength, indirect tensile strength/tensile strength ratio (ITS/TSR), Hamburg wheel tracking (HWT), multiple stress creep recovery (MSCR), and semi-circular bending (SCB) tests were conducted. AS-OS showed the best overall performance. It increased binder bond strength (BBS) by 52.8% for coarse WPA and 61.5% for fine WPA, while the optimum 0.5% dosage improved tensile bond strength by 81.0% and 97.2%, respectively. AS-OS also increased shear strength by 58.8-68.3% and improved TSR to 89.0% and 86.2%. In HWT, C-OS and F-OS reduced final rut depth by 44.0% and 45.8%, respectively. SCB results further showed higher fracture work, especially for F-OS. The findings indicate that proper anti-stripping chemistry is essential for durable WPA-SBS asphalt mixtures.