A Multi-Physics Modeling Framework for Optimizing Spreading and Sintering Parameters in Powder Bed Fusion

Powder Bed Fusion-Laser Beam/Polymer (PBF-LB/P) is a key additive manufacturing technology widely used in aerospace, but its process parameters are difficult to optimize for thermoplastic composites due to poor powder flowability and unstable melting regions. To address this challenge, this paper develops discrete element and finite element models to systematically determine the PBF process window for both powder spreading and sintering stages, with verified reliability. In the spreading stage, the powder layer performance is evaluated through surface profile, density, and uniformity. The effects of reinforcement phase, spreading speed, and layer thickness are analyzed, establishing reasonable spreading parameter windows. It is found that the optimal layer thickness for PEEK powder is determined to be 0.13 mm, while that for PEEK/CF composite powder is 0.12 mm. At the optimal layer thickness, the powder bed exhibits desirable properties, which minimize its adverse influence on the sintering process and serve as a prerequisite for subsequently establishing the sintering process window. For the sintering stage, sufficient sintering constraint criteria are established, and a systematic determination method is proposed. By analyzing microscopic sintering mechanisms and characterizing the effects of laser power, scanning speed, and hatching space on melt pool dimensions and temperature, a reasonable sintering process window can be efficiently determined. It is found that within the process window, the PEEK specimens achieved a maximum relative density of 99.31% and exhibited a tensile strength 13.1% higher than that of specimens processed outside the window, demonstrating a clear superiority.