Experimental Study on Slicing Sapphire Crystal with Ultrasonic-Assisted Diamond Wire Saw

Sapphire crystal, owing to its high hardness, chemical inertness, thermal stability, optical transparency, and superior dielectric strength, as well as resistance to scratching, abrasion, friction, and wear, is widely utilized in a broad range of engineering applications. Slicing is the most critical step in sapphire industry processing, as it largely dictates the final surface quality and morphology. Conventional wire sawing methods often lead to undesirable surface defects, while ultrasonic-assisted diamond wire sawing (UADWS) offers potential advantages through enhanced abrasive self-sharpening, micro-hammering, and improved lubricant penetration. However, its influence on sapphire slicing remains insufficiently studied. This study investigates the effects of UADWS parameters-ultrasonic amplitude, horn application position, feed speed, and wire speed-on the surface quality of sapphire crystals. Both single-factor and orthogonal five-level experiments were designed, taking wire and feed speed within industrial parameter ranges. Surface roughness (Ra) and waviness peak-valley (PV) difference were used as evaluation indices, and range and variance analyses were performed. In addition, power regression models were developed to predict Ra and PV under varying conditions. The surface morphology results from single-factor experiments reveal that increasing feed speed and wire speed reduces the effectiveness of ultrasonic assistance, while application horn position exerts only a minor influence. Overall, orthogonal analysis confirmed that the relative influence of process parameters on surface quality follows the order: feed speed > wire speed > amplitude > application horn position. These findings establish a foundation for optimizing the sawing and ultrasonic parameters of UADWS to enhance sapphire surface quality, reduce downstream processing requirements, and clarify the importance of controlling feed speed and wire speed.