Molecular Imprinting of Phosphate Moieties into the Silica Matrix as a Novel Phosphorus Rechargeable System for...

Silica gel polymer material with imprinted phosphate cavities was successfully obtained using one-pot sol-gel reaction. Differences in the textural properties concerning the reduction in specific area and pore size between functionalized and pristine silica gel demonstrated the presence of the phosphate moieties in the cavities. The chemical and structural characterization of the functionalized material before and after copper adsorption was performed by Fourier-transform infrared spectroscopy (FTIR) and solid-state ²⁹Si and ³¹P nuclear magnetic resonance (NMR) spectroscopy. All these measures proposed a phosphate non-covalently bound in the cavities of the silica gel and stabilized by silanol groups on the surface of the matrix. The phosphate-copper complex is removed after the metal desorption process, and the free cavities in the silica matrix can be replenished with phosphoric acid without affecting its adsorption capacity. The entire process of phosphate incorporation, copper adsorption, and metal-ligand desorption was repeated in three cycles, showing a similar metal adsorption capacity. Energy-dispersive X-ray spectroscopy (SEM-EDX) experiments were performed to monitor the presence and proportion of phosphorus and copper at each step of the phosphate loading and copper adsorption processes. These results demonstrate the feasibility of synthesizing a rechargeable polymer material with functional molded cavities with phosphate groups capable of adsorbing copper ions. Finally, this investigation represents the first approach to new materials with a rechargeable ligand system for the adsorption of heavy metals.