Related Experiment Videos
Event-Triggered Adaptive Consensus Control for Nonlinear Multi-Agent Systems with Prescribed Performance and
Wenjie Wang1, Qian Chen2,3, Huiying Xu2,3
1Shenzhen Robotmeta Technology Co., Ltd., Shenzhen 518103, China.
Abstract:
This work addresses the output agreement problem for networked nonlinear agents with simultaneous transient performance specifications and state limitations. A performance function confines synchronization deviation of each agent within a user-designed envelope that quantifies both convergence speed and permissible steady-state offset. Logarithmic barrier certificates are embedded into the recursive control construction to prevent any state variable from exiting its admissible region. Unknown plant nonlinearities are compensated via Gaussian radial basis function approximators, and a first-order filter bypasses the repeated analytic differentiation that complicates traditional recursive designs. To reduce frequent actuator adjustments, each agent's control signal is refreshed only at aperiodic instants governed by a local dynamic triggering rule depending exclusively on its own measurements. A Lyapunov analysis confirms that all closed-loop trajectories remain semi-globally uniformly bounded, the synchronization errors obey the imposed performance limits, the state restrictions are never breached, and infinitely many triggering attempts cannot accumulate in finite time. The theoretical findings are corroborated through a computational experiment involving four heterogeneous followers coordinated by a single virtual leader.
Related Concept Videos
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller aligns...
Control Systems
At the heart...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
Multi-input and Multi-variable systems
In the absence of...
Control System Problem
When forming a closed-loop system, issues can arise if the poles cross into the unstable region, leading to potential...