Related Experiment Video
Updated: Aug 28, 2026

A Real-Time Interactive System for Studying Confrontational Pursuit Behavior in Rodents
Published on: May 16, 2025
Event-Triggered Control for Switched Systems Under DoS Attacks: A Mixed H ∞ and Passive Strategy
Abstract:
This article investigates the asynchronous mixed $H_{\infty } $ and passive control for discrete-time switched systems subject to denial-of-service (DoS) attacks and communication resource constraints. In order to alleviate the communication pressure, an event-triggered mechanism (ETM) is adopted. However, due to the introduction of ETM, the asynchronous phenomenon may occur between the subsystem and controller. In addition, DoS attacks can have adverse effects on system performance by interfering with communication channels. To address the above issues, a weighted mixed $H_{\infty } $ and passivity performance criterion is adopted to balance disturbance attenuation and energy dissipation. On this basis, the Lyapunov function method is used to design the average dwell time (ADT) switching signal, ensuring that the asynchronous switched system is globally uniformly asymptotically stable (GUAS). Meanwhile, the design strategy of the controller is presented in the form of linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed method is demonstrated through a practical example.
Related Concept Videos
Control System Problem
When forming a closed-loop system, issues can arise if the poles cross into the unstable region, leading to potential...
Line Protection with Impedance Relays
Under normal conditions, low load currents keep the measured...
Control Systems
At the heart...
Zones of Protection
Protective zones are defined by closed dashed lines, containing one or more components. A key characteristic of these zones is the strategic placement of...
Overcurrent Relays
Instantaneous overcurrent relays activate immediately when the input current exceeds a predetermined value, known as the pickup current, instantly energizing the circuit breaker trip coil. This rapid response is vital for addressing severe faults quickly.
Time-delay overcurrent relays, on the other...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...