Risk-Aware Fault-Tolerant Multisensor Fusion for Human-Machine Decision Support in Autonomous Navigation and Mooring...

Autonomous navigation and mooring in confined waters require a navigation solution that remains reliable when individual sensing channels are delayed, unavailable, or environmentally degraded. A risk- and integrity-aware architecture was developed for joint processing of RTK-GNSS, inertial and heading measurements, short-range radar, LiDAR, camera, AIS, ultrasonic ranging, propulsion feedback, environmental, and mooring-line tension data. Asynchronous time alignment is combined with sensor-quality assessment, innovation-based fault detection and isolation, covariance adaptation, active-set reconfiguration, protection-level monitoring, and risk-dependent allocation of authority between automation and the operator. The system was evaluated during a five-day campaign comprising 40 runs, four operational phases, 480 synchronized evaluation epochs, and 16 controlled single-sensor or combined sensor-degradation events. Under nominal conditions, horizontal-position and heading RMSE were 0.043 m and 0.176°, respectively. All 64 fault-active diagnostic records were identified; mean event-log detection and controlled-recovery latencies were 3.17 s and 6.34 s. Horizontal protection-level coverage was 99.3% for single-fault epochs and 100% for combined-fault epochs. One combined-fault docking run contained five consecutive aborted decision epochs, while no unsafe-autonomy event was recorded. The measurements therefore indicate bounded degradation of the navigation solution and conservative transfer of authority when sensing integrity decreases. Because all injected-fault runs were acquired under adverse weather whereas nominal runs were acquired under calm or moderate conditions, the condition-class RMSE differences reported below are descriptive and must not be interpreted as isolated causal effects of sensor faults.