Related Experiment Video
Updated: Oct 28, 2026

Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
A Dual-Weighting and Adaptive Regularization Framework for Takagi-Sugeno Identification of Nonlinear Dynamic Systems
Gabriel Moreano1,2, Julio Tafur2, Valeria Andino3
1Department of Electrical, Electronics and Telecommunications, Universidad de las Fuerzas Armadas ESPE, Av. General Rumiñahui S/N, Sangolquí 171103, Ecuador.
Abstract:
In sensor-based monitoring and control systems, dynamic models are often identified from data collected in closed loop (where the noisy sensor measurements that drive the controller are also regressors). Feedback links regressors to disturbances, which violates one of the basic assumptions of least squares and leads to biased-and sometimes highly unstable-estimates. This difficulty is worsened in Takagi-Sugeno (TS) models, as they involve global coupling: poorly excited regions can dominate the model. In this work, we address this by proposing Dual-Weighted Takagi-Sugeno Identification (DW-TSI), a framework that combines dual weighting with adaptive regularization. We achieve this through a rule-wise weighted least-squares formulation that decomposes the global problem into local subproblems, weighting each sample by its membership activation and preserving the interpretability of the local submodels in state space; an adaptive ridge term then scales the penalty of each rule inversely with its cumulative activation, ensuring that conditioning is reinforced exactly where the sensor data are weakest. The framework is extensively validated on an open-loop unstable physical aero-pendulum, identified using only closed-loop angular measurements. Unlike classical TS models, DW-TSI maintains boundedness in a multi-step autonomous simulation, and it approximates subspace identification (N4SID) accurately. A sensor noise injection study further shows that the proposed estimator degrades gracefully in the presence of measurement noise, whereas unregularized TS estimation collapses. These models can be deployed for sensor-based feedback control without any retuning.
Related Concept Videos
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
Multi-input and Multi-variable systems
In the absence of...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear.
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Modeling with Differential Equations
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be calculated...