Evaluation of sunlight stability of polyurethane elastomers for maxillofacial use. I

The evaluation of the efficiency of polymer additives with special emphasis on uv absorbers and antioxidants in polyurethane elastomers has been completed. Aliphatic polyurethanes were chosen for this study because their properties closely relate to the requirements of maxillofacial prosthesis. The polyurethane elastomers were either synthesized by ourselves or formulated according to the manufacturer's recommendation. Eleven different types of uv absorbes, coupled with one antioxidant, were incorporated into the polyurethane systems. The Atlas twin-lamp carbon arc Weatherometer was used as the source of uv. The samples were periodically withdrawn for examination of yellowing and tackiness. It was found that, although the incorporation of uv stabilizers enhanced the uv resistance of polyurethanes, the problem of tackiness resulting from uv aging was not solved satisfactorily. The phenomenon of yellowing, however, was significantly improved, mainly due to the aliphatic structure of polyurethanes. The most promising uv absorbers are Tinuvin 770 and the combination of Tinuvin 328, ZnO, and an antioxidant. Their effectiveness in other polyurethane systems is not known and further research is underway to explore this field. Hopefully, these findings will greatly assist the successful application polyurethane elastomers in maxillofacial prosthesis.