Corrosion of a new copper-gold or copper-platinum intrauterine device

It has been shown previously that supplementing plastic intrauterine devices (IUDs) with copper wire enhances the antifertility effect of the device. The use of copper intrauterine contraceptive devices, however, is currently limited to two to three years, mainly because of wire fragmentation, which was observed as early as after eight months of use. In the resulting search for a long-lasting device, two new systems of duplex wire, with gold and platinum cores electrolytically coated with copper, were devised and studied. Initially, duplex wires and controls were exposed to physiological solution. Copper dissolution rate and corrosion morphology were studied by weight-loss measurements and optical metallography. Similar systems were then surgically implanted in rat uteri for varying periods of up to 26 weeks. Electron microanalysis of corrosion products, in addition to weight-loss measurements and metallography, was performed. The results showed that a uniform and ductile copper coating is obtainable by electroplating on gold and platinum wires. Rate of copper dissolution is similar to that of solid copper wire. No dissolution of gold and platinum in the controls or coated wires was detected by weight loss, metallography, or atomic absorption measurements. Microanalysis of the deposits and corrosion products on the wires in the uteri environment showed sulfur, chlorine, and calcium, in addition to copper. The results of this study suggest that supplementing IUDs with copper-coated gold or platinum wires may result in significant prolongation of the life span of the device by preventing uncontrolled loss of copper caused by wire fragmentation.