In vitro performance assessment of tubular membrane oxygenators

The definite advantage in oxygen transfer performance of staged (single, double and triple) tubular membrane oxygenators (TMO) is compared with reference to flat membrane oxygenators (Travenol or Landé Edwards). The overall construction of staged TMO with a blood mixing chamber is a very good way to destroy the blood boundary layer and modify the blood stagnant zone in the device. Four sizes of staged TMO were studied using the principle that gases dissolve in water in concentrations linearly proportional to the partial pressures of the gases when in equilibrium with the liquid. The experimental results show that the oxygen transfer rate and the corresponding overall oxygen mass transfer coefficient of staged TMO are increased by the same order as those of the reference membrane oxygenators. Furthermore the essential parameter analysis prove that oxygen transfer increases with the number of stages and decreases with the length of the blood tubular modules. The multistage design of TMO revealed an increase in the hydrodynamic resistance occurring in the apparatus. However the highest relative oxygen transfer efficiency suggests that better fluid distribution as well as better uniformity of oxygenation prevail in the staged devices.