Related Experiment Video
Updated: Aug 12, 2026
08:57
VacuSIP, an Improved InEx Method for In Situ Measurement of Particulate and Dissolved Compounds Processed by Active Suspension Feeders
Published on: August 3, 2016
[Air quality and high volume sampling methods of atmospheric dusts]
Sozial- Und Praventivmedizin
|October 1, 1981
Abstract:
Various combinations of hi-vol samplers, size-selective inlet and two cascade impactors were tested near a highway. The Sierra 235 cascade slot impactor yielded low total dust values and very small apparent aerodynamic diameters. Sampling with the size selective inlet was found to correlate satisfactorily with hi-vol data. The effect of humidity on the mass of field collected dust is also discussed.
Related Concept Videos
01:18Sampling Methods: Sample Types
Sampling materials are classified into three main types: solid, liquid, and gas.
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
01:25Atomic Absorption Spectroscopy: Atomization Methods
Atomic Absorption Spectroscopy (AAS) atomizes samples through flame atomization or electrothermal atomization. Flame atomization typically involves a nebulizer and spray chamber assembly to combine the sample with a fuel–oxidant mixture, creating a fine aerosol mist that enters a burner. Typically, the fuel and oxidant are combined in an approximately stoichiometric ratio. However, for atoms that are easily oxidized, a fuel-rich mixture may be more advantageous. Only about 5% of the aerosol...