In vitro oxyhaemoglobin saturation measurements in haemoglobin solutions using fibreoptic pulmonary artery catheters

We compared in vitro oxyhaemoglobin saturations using two pulmonary artery catheters (catheter SO2), with oxyhaemoglobin saturations (SO2) measured by the IL282 co-oximeter and derived partial oxyhaemoglobin saturations (partial SO2) at different oxygen tensions (PO2) in six solutions: whole blood, 50:50 mixture of whole blood and Plasmalyte A (haemodiluted blood), 50:50 mixture of whole blood and 8% pyridoxylated haemoglobin-polyoxyethylene (PHP) conjugate (WB-PHP), 75:25 mixture of 8% PHP and Plasmalyte A solution (PHP66), 50:50 mixture of 8% PHP and Plasmalyte A solution (PHP44) and stroma-free haemoglobin solution (SFH). Calculated P50 values (PO2 vs SO2) were 3.79, 3.58, 3.49, 3.15, 3.04 and 2.07 kPa, respectively. However, if partial SO2 was used the curves were shifted to the left, reducing P50. Catheter SO2 correlated well with SO2 in whole blood (r2 > 0.99 for both catheters), haemodiluted blood (r2 > 0.98 for both catheters) and WB-PHP solution (r2 = 0.94 for both catheters). In PHP44 (r2 = 0.64 and r2 = 0.57), PHP66 (r2 = 0.40 for the Oximetrix and r2 = 0.25 for the Edwards catheter) and SFH solutions (r2 = 0.33 for the Oximetrix and r2 = 0.22 for the Edwards catheter) both catheters performed poorly. We conclude that mixed venous oxyhaemoglobin saturations measured by oximetric pulmonary artery catheters are inaccurate in the presence of haemoglobin solutions. For accuracy a multi-wavelength co-oximeter should be used if blood containing PHP or SFH is to be analysed.