A comparative study of fixation techniques for type II fractures of the odontoid process

Primary screw fixation of a Type II odontoid fracture or non-union is an attractive alternative to posterior atlanto-axial arthrodesis in that normal cervical motion can be maintained. Eight cervical cadaver spines, ranging in age from 17-90 years, were used for study. Type II fractures of the dens were created using an osteotome. Simulated fractures were fixed using one or two 3.5-mm bone screws. After testing each screw fixation technique, the screws were removed and a posterior C1-C2 brooks sublaminar wiring was performed using four 18-gauge wires with wooden blocks to simulate bone graft. No significant differences were found between bending and torsional stiffnesses for the one-screw and two-screw specimens. No significant differences were found between one- and two-screw fixation when compared with primary C1-C2 wiring in torsion. One- or two-screw fixation was as stiff as primary C1-C2 wiring in bending. One or two screws offers similar stability for fixation for a dens fracture. One- and two-screw fixation is at least as stiff as primary C1-C2 wiring in torsion and one- or two-screw fixation is stiffer than primary C1-C2 wiring in bending.