Monte Carlo optimization of metal/phosphor screens at megavoltage energies

The physics of imaging with metal/phosphor (Gd2O2S:Tb on brass) screens at megavoltage energies has been investigated using Monte Carlo simulation. It has been found that pair production is a significant contributor to energy deposition for Bremsstrahlung beams with energies greater than 6 MV. The effects of different thicknesses of phosphor and metal have been studied, and it is shown that the metal plays a significant role in establishing electronic equilibrium in the phosphor. The transport of optical photons through the phosphor has been modeled, and was found that only 10% to 20% of the light created in the phosphor escapes from the surface, with much of the loss being due to total internal reflection at the surface. Calculated results have been compared with experimental measurements of screen brightness for different phosphor and metal thicknesses. The SNR of a video electronic portal imaging device (VEPID) has been calculated as a function of x-ray and optical photon detection efficiency. The non-Poisson distribution of energy deposition in the phosphor is an important contributor to the SNR. The results of this paper should serve as a useful guide to the engineering design of future electronic portal imaging systems.