Resistance to biodegradative stress cracking in microporous vascular access grafts

Degradative cracking, more commonly known as "environmental stress cracking" (ESC) has been observed in many implanted polyetherurethane elastomers. This phenomenon has been attributed to biochemical and cellular interactions at the surface of the implanted material causing polymer chain cleavage. This may result in surface fissuring followed by the deep cracking associated with considerable biodegradation of the polymer, resulting in loss of mechanical strength and the formation of aneurysms in an in vivo situation. These cracking effects are believed to be due to mechanical stress combined with the oxidising actions of macrophages and giant cells, as surface cracking has been observed to occur directly under adherent macrophages on a polyetherurethane implant. These cells form part of the body's immune response which uses enzymes and reactive oxygen species (O2, O2-, and HO. and H2O2) to degrade foreign material. We describe a modification of an in vitro test method developed by Zaho et al. [1] using glass wool and a Hydrogen Peroxide/Cobalt (II) Chloride (H2O2/CoCl2) mixture to replicate the oxidising effects of macrophages in vivo. The modifications were made to establish a routine testing system for resistance to biodegradation which could be used to screen a range of polymers designed for use in microporous vascular grafts. The grafts are pre-stressed by a method devised by Stokes et al. [2] where each graft is stretched to a predetermined elongation over a mandrel and the strain is fixed by tying PTFE tape around each end of the mandrel.