Titanium-porcelain system. Part II: Bond strength of fired porcelain on nitrided pure titanium

Commercially pure titanium (CPT) substrate was subjected to porcelain firing and bond strengths under three-point bending mode (span length: 15 mm; crosshead speed: 0.5 mm/min) were evaluated. Experimental variables included surface treatments of CPT and porcelain firing schedules. Variables for the surface treatments were (1) sandblasting, (2) mono- and triple-layered nitridation, and (3) mono-layered chrome-doped nitridation. Variables for the porcelain firing schedule included (4) bonding agent application, (5) bonding agent plus gold bonding agent application, and (6) Procera porcelain application. All together eleven sample groups were prepared with different combination of aforementioned experimental variables. Statistically all of them exhibited no significant differences. Hence, we employed two further criteria; (I) the minimum bond strength should exceed the maximum porcelain strength per se, and (II) the CPT substrate should not be heated close to the beta-transus temperature. After applying these criteria, it was concluded that mono-layered nitridation and mono-layered application of chrome-doped nitridation on both (with and without) sandblasted and non-sandblasted surfaces were the most promising conditions for a successful Titanium-Porcelain System.