Analysis of wool fiber by alkali-catalyzed pyrolysis gas chromatography

Alkali-catalyzed pyrolysis gas chromatography (PyGC) has been used to identify minute samples of wool fiber. The wool sample to which aqueous sodium hydroxide was added was pyrolyzed in a Curie-point pyrolyzer attached to a gas chromatograph or a gas chromatograph-mass spectrometer. The addition of an aqueous solution of sodium hydroxide increased the production of specific volatile pyrolysis products from the constitutive amino acid residues of wool protein, i.e. acetaldehyde from alanine or proline, isobutyronitrile from valine, 2-methylbutyronitrile from isoleucine, isovaleronitrile from leucine and toluene from phenylalanine. Compared with conventional non-catalyzed PyGC, the alkali-catalyzed PyGC was found to greatly improve the detection limit of wool fiber and make it possible to analyze very minute samples. The alkali-catalyzed PyGC presented here has been shown to be applicable to minute thermally-denatured samples of wool fiber which cannot be identified successfully by morphological inspection using a microscope or by using Fourier-transform infrared microspectroscopy. Furthermore, the present PyGC method was successfully used for several protein samples and was shown to be useful for analysis of proteins other than wool fibers by using different special pyrograms reflecting different amino acid compositions.