Heat strain models applicable for protective clothing systems: comparison of core temperature response

Core temperature (Tc) output comparisons were analyzed from thermal models applicable to persons wearing protective clothing. The two models evaluated were the United States (US) Army Research Institute of Environmental Medicine (USARIEM) heat strain experimental model and the United Kingdom (UK) Loughborough (LUT25) model. Data were derived from collaborative heat-acclimation studies conducted by three organizations and included an intermittent-work protocol (Canada) and a continuous-exercise/heat stress protocol (UK and US). Volunteers from the US and the UK were exposed to a standard exercise/heat stress protocol (ambient temperature 35 degrees C/50% relative humidity, wind speed 1 m/s, level treadmill speed 1.34 m/s). Canadian Forces volunteers did an intermittent-work protocol (15 min moderate work/15 min rest at ambient temperature of 40 degrees C/30% relative humidity, wind speed approximately 0.4 m/s). Each model reliably predicted Tc responses (within the margin of error determined by 1 root mean square deviation) during work in the heat with protective clothing. Models that are analytically similar to the classic Stolwijk-Hardy model serve as robust operational tools for prediction of physiological heat strain when modified to incorporate clothing heat-exchange factors.