Properties of calcium phosphate coatings before and after exposure to simulated biological fluid

The surface qualities of calcium phosphate (CaP) implants are important factors determining the nature and degree of cellular behaviour, especially cellular attachment, proliferation and differentiation. Thus, in this study, the chemical composition and crystallographic properties of radiofrequency sputter-deposited CaP coatings prior to and after in vitro immersion in a physiological solution were characterized. Significant differences in crystallite size were observed with different heat treatments, with coatings heat treated at 850 degrees C (CA8) having larger crystallites compared to coatings heat treated at 700 degrees C (CA7). However, no statistical difference in the Ca/P ratio, carbon concentration and surface energy were observed with different heat treatments. After immersion in a physiological solution, the crystallite size was significantly increased. The crystallite size for the CA8 and CA7 coatings remained statistically different after 1-week immersion in solution. An increase in carbon concentration was also observed for both samples after 1-week immersion in solution. However, no significant differences in the Ca/P ratio and surface energy were indicated between the two coatings after 1-week immersion in solution. In addition, no statistical difference in surface energy was observed for both samples initially and after 1 week.