Related Experiment Video
Updated: Oct 24, 2026

Determination of the Gas-phase Acidities of Oligopeptides
Published on: June 24, 2013
Acidic and neutral drugs screen in blood with quantitation using microbore high-performance liquid
1Institute of Science and Forensic Medicine, Singapore.
Abstract:
Blood previously acidified with aqueous saturated ammonium chloride solution was extracted with ethyl acetate. The dried extract was subjected to acetonitrile-hexane partition. The acetonitrile portion was analysed for the presence of acidic and neutral drugs by HPLC-DAD (200 mm x 2.1 mm I.D. microbore ODS-Hypersil column) and GC-FID (25 m narrow-bore x 0.25 mm I.D. HP-5 column with 0.33 micron film thickness). The protocol was found to be suitable for both clinical toxicology (including emergency toxicology) and postmortem toxicology. At least 66 drugs of interest were unequivocally identified by RRTs (HPLC) and UV spectra (DAD) match while another 12 were unequivocally identified by double RRTs match (HPLC and GC). Quantitation was facilitated by incorporating calibration blood standards in each assay batch. The five drugs most commonly encountered in clinical blood specimens (1150 cases) were: paracetamol (47.4% of the cases); chlormezanone (6.6%), theophylline (1.74%), naproxen (1.65%) and mefenamic acid (1.56%). The following drugs were detected in toxicologically significant quantities in postmortem blood specimens (245 cases): phenobarbitone (1.22% of the cases), naproxen (0.82%), chlormezanone (0.82%), theophylline (0.82%), carbamazepine (0.41%) and paracetamol (0.41%).
More Related Videos
10:17High-throughput and Comprehensive Drug Surveillance Using Multisegment Injection-Capillary Electrophoresis-Mass Spectrometry
Published on: April 23, 2019
14:42Liquid Chromatography Coupled to Refractive Index or Mass Spectrometric Detection for Metabolite Profiling in Lysate-based Cell-free Systems
Published on: September 23, 2021
Related Concept Videos
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
High-Performance Liquid Chromatography: Types of Detectors
Ion-Exchange Chromatography
Capillary Electrophoresis: Instrumentation