Related Experiment Video
Updated: Oct 17, 2026

Protocol for Relative Hydrodynamic Assessment of Tri-leaflet Polymer Valves
Published on: October 17, 2013
Assessment of the Björk-Shiley prosthetic valve orifice area in the aortic position
1Department of Thoracic and Cardiovascular Surgery, Tohoku University School of Medicine, Sendai, Japan.
Abstract:
The actual orifice area of a valve is still considered to be a valuable index for assessing prosthetic valve function. Valve orifice area as calculated by Gorlin's formula is, however, not constant but changes in proportion to the transvalvular flow rate. The purpose of the present study was to examine the relationship between orifice area and flow rate across the Björk-Shiley prosthetic valve as calculated by Gorlin's formula, and to modify the formula in a series of patients with the Björk-Shiley prosthetic valve in the aortic position. Fifty-six patients who had received aortic valve replacement with a Björk-Shiley prosthetic valve underwent cardiac catheterization. Prosthetic valve orifice area was calculated by Gorlin's formula and then plotted against flow rate across the valve with respect to valve size. The relationship between orifice area and flow was linear. The discharge coefficient of Gorlin's formula was plotted against flow rate, and a linear correlation was obtained. By substituting Gorlin's formula for an empiric coefficient into the function for transvalvular flow rate, a modified formula that can predict the actual orifice area of the prosthetic valve is obtained.
More Related Videos
Related Concept Videos
Assessment of apical pulse
Assessing the apical pulse is a critical nursing procedure, particularly indicated for:
Assessment of apical radial pulse
The A-R pulse assessment involves simultaneous evaluation of the apical and radial pulses. When the apical and radial pulse rates vary, this assessment helps identify a pulse deficit.
Pre-Procedural Preparation
Assessment of the Cardiovascular System IV: Auscultation
Normal Heart Sounds
S1 (First Heart Sound)-
S1 is made by the closure of the mitral and tricuspid valves (atrioventricular valves), marking the beginning of systole.
S2 (Second Heart Sound)-
S2 is made by the closure of the aortic and pulmonic valves (semilunar valves), marking the end of the systole.
Mitral Valve Prolapse II: Assessment and Management
Aortic Regurgitation I: Introduction
Aortic Regurgitation II: Clinical Features and Diagnostic Tests

