Microstructural and in vitro chemical investigations into plasma-sprayed bioceramic coatings

Hydroxyapatite (HA) coatings plasma sprayed without and with bond coats (titania, zirconia) onto titanium alloy (Ti6A14V) substrates under both atmospheric and low pressure plasma spray conditions were investigated in terms of their microstructure and their resorption resistance during immersion in simulated body fluid (Hank's balanced salt solution). The microstructures of test samples were characterized using SEM on as-sprayed and leached surfaces and on the corresponding cross sections. Selected coating systems were studied by 2-dimensional secondary ion mass spectroscopy imaging to obtain information on plasma spray induced diffusional processes at the coating interfaces, as well as the spatial distribution of minor and trace elements. Coatings consisting of thin (10-15 microm) titania/zirconia (eutectic ratio) and titania bond coats, combined with a 150- to 180-microm thick HA top coat, yielded peel strengths in excess of 32 N/m, as well as sufficient resorption resistance.