The effect of phosphor persistence on image quality in digital x-ray scanning systems

A digital x-ray scanning system offers several advantages over conventional film-screen systems. However, there are sources of image degradation resulting from the scanning motion, such as motion blur due to the temporal response of the phosphor. This mechanism produces an asymmetrical blur, requiring the use of the complex optical transfer function (OTF) rather than the normal modulation transfer function (MTF) for correct characterization of image resolution. The luminescence response of eight phosphors was measured under pulsed x-ray excitation. A weighted exponential model was used to represent the primary luminescence. The dominant luminescence life-times ranged from 2.7 microseconds for Gd2O2S:Pr to 558 microseconds for Gd2O2S:Tb. The long term response was also measured, monitoring significant increases in a slow form of luminescence known as afterglow. Afterglow was modeled by an inverse power law equation. Afterglow was found to be strong in two of the phosphors studied (ZnCdS:Ag and YTaO4). In selecting a phosphor for a scanning system, it must satisfy several criteria, including a fast temporal response. Thus, a phosphor like Gd2O2S:Tb, which has a slow luminescence, but otherwise excellent imaging properties, may not be as useful as a more rapid phosphor like CsI:Tl.