[Practical use of lithium borate in thermoluminescent dosimetry (author's transl)]

The authors recall the functional principles of thermoluminescent dosimeters: heating, apparatus for measuring the emitted light, circulation of nitrogen, reference source. They take this opportunity to stress the essential role played by the circulation of nitrogen over the dosimeters which equilibrates the temperature of the photo multiplier, reduces the emission of unwanted light, prevents the combustion of dust or other possible impurities and finally improves the reproductibility of the measurements even for high dosod for finding the optimum working conditions for the heating apparatus of the planchette in the most simple T.L.D. readers and in those where the heating apparatus of the planchette has a pre-heating phase. They then study the dosimetric properties of lithium borate incorporated in thin teflon discs (type DLB. 0.13 and 0.4). This shows itself to be very interesting for certain uses because it is a solid dosimeter which does not require annealing between two measurements. The reproductibility of the measurements obtained with this material, the stability of its response relative to the delay between radiation and reading (fading), its response relative to the absorbed dose plus the nature and the energy of the rays, are presented with the usual reservations made for this type of dosimetry. The authors conclude by citing a few applications where they have been able to achieve a satisfactory result with the aid of lithium borate.