Small soft left ventricular assist device powered by intraaortic balloon pump console for infants: a less expensive...

We have developed a pneumatically driven 20 cc soft ventricle for temporary right, left, or biventricular assist. The ventricle consists of a vacuum-formed soft housing, diaphragm, tricuspid outflow valve, and biflap inflow valve. All components including inflow and outflow valves were made with Pellethane. The advantages of this blood pump are as follows: it eliminates use of the quick connect system and therefore is less thrombogenic; the biflap inflow valve provides low inflow resistance; the soft ventricle is easy to implant; the polyurethane valves eliminate blood damage and thromboembolism and are low in cost compared with mechanical valves; and the vacuum-forming technique is reliable, fast, capable of mass production, and therefore inexpensive. We have already demonstrated in both in vitro and in vivo experiments that this ventricle has excellent hemodynamic performance with less blood damage and thrombogenesis. In this study, we evaluated the possible application of a well-defined and widely distributed intraaortic balloon pump (IABP) console to the 20 cc left ventricular assist device (LVAD) driver. The pump was tested in 6 mongrel dogs (6 to 10 kg) using an IABP console. The pump was connected between the left atrium and the ascending aorta, placed paracorporeally on the chest wall, and driven at a synchronous or fixed rate mode without using vacuum. The 20 cc ventricle could maintain the same output as the control output of the natural heart at filling pressures of 5 to 10 mm Hg during the entire observation time of 5 h. Thus, this 20 cc soft ventricle has the potential to be widely used for the treatment of severe heart failure in infants because of its excellent hemodynamic performance, simplicity, and low cost.