Sanitation of wallboard colonized with Stachybotrys chartarum

Sections (8 cm2) of unused, nonsterile gypsum wallboard (dry wall) were inoculated with varying densities (10(4) to approximately 10(8)/ml) of conidia from 14- to 21-day cultures of Stachybotrys chartarum grown on cellulose agar. The sections were permitted to air dry and were placed into vessels with 86% or 92% RH and incubated at 22-25 degrees C for up to 12 weeks. The moisture content of the dryboard increased from near 10% to over 35%. Selected sections with confluent surface growth, mainly of S. chartarum, were obtained within 3 weeks. Sections were cleaned with a quaternary or quaternary and chlorine dioxide or a concentrated oxygen-saline solution and treated, in some cases, with a preservative system and returned to humidity vessels. Reemergence of S. chartarum from inoculated and treated surfaces occurred within 5 weeks only with sections treated with the quaternary alone. Other fungi, mostly species of Aspergillus, Chaetomium and Penicillium, slowly colonized (between 9-12 weeks) at least some areas of most treated surfaces and most uninoculated control surfaces. Stachybotrys chartarum was also found on several sections of uninoculated controls. Sections treated with a quaternary/acrylic and placed in a dynamic challenging chamber remained visually free of colonized fungi for over 90 days. These studies indicate that control samples of uninstalled wallboard, available from local distributors, can contain a baseline bioburden, including S. chartarum, that will colonize surfaces under high humidity conditions. Sanitation and preservation treatment of the wallboard can markedly delay regrowth of these fungi, particularly of S. chartarum.