Influence of column design on process-scale ion-exchange chromatography
Related Experiment Video
Updated: Oct 17, 2026

Curtain Flow Column: Optimization of Efficiency and Sensitivity
Published on: June 12, 2016
P R Levison1, A K Hopkins, P Hathi
1Whatman International Ltd., Maidstone, UK. peterl@whatman.co.uk
Abstract:
The performance of two new designs of pump-packed axial flow process chromatography columns have been evaluated for the preparative anion-exchange chromatography of hen egg-white proteins using Whatman Express-Ion Exchanger Q. A 16 1 Side-Pack column and a 24 1 IsoPak column containing Express-Ion Q were used in this study. In each case ca. 20 1 feedstock containing 5-7 g protein/l, was applied per litre packed bed at flow-rates of ca. 150 and 300 cm/h. In each case the ovalbumin binding capacity was ca. 70 g/l packed bed with ca. 100% (w/w) recovery of applied protein. A clean-in-place procedure involving storage in 0.5 M NaOH was effective in maintaining chromatographic performance in all cases. These data were consistent with our previous work using the more traditionally configured slurry-packed axial flow columns. Each of these column designs were easy to use facilitating rapid packing with this adsorbent and in the case of IsoPak rapid pump unpacking. The introduction of these column designs significantly improves the task of column packing, hitherto a labour intensive, physically demanding and potentially unreproducible process.
Related Concept Videos
Ion-Exchange Chromatography
Principles Of Column Chromatography
Ion Exchange
Types Of Column Chromatography
Gel Filtration Chromatography
When the...
Column Efficiency: Rate Theory
During elution, a solute molecule experiences numerous transitions between stationary and mobile phases, exhibiting irregular residence times in...
Optimizing Chromatographic Separations
Band broadening refers to spreading solute bands as they travel through the column. This broadening can impact resolution. Plate height (H) represents the length required for one theoretical plate. A lower plate height corresponds to...

