Related Experiment Video
Updated: Aug 10, 2026

Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels
Published on: January 28, 2022
Effect of preferred volume setting on speech audibility in different hearing aid circuits
1Department of Speech and Hearing Sciences, University of Washington, Seattle 98105, USA.
Abstract:
This study compared preferred volume setting for linear peak clipping, compression limiting, and wide dynamic range compression (WDRC) amplification and quantified speech audibility at the preferred volume setting for each amplification type. Ten listeners with mild-to-moderate hearing loss were fitted monaurally with a behind-the-ear hearing aid programmed sequentially with WDRC, compression limiting, and linear peak clipping amplification. Speech was presented in quiet and in noise at a range of input levels. In each condition, the listener adjusted the volume for maximum clarity. Signal levels were measured using a probe microphone system. There was no significant difference in speech audibility between amplification strategies for any speech level regardless of the presence or absence of background noise. These results imply that the improved audibility advantage of WDRC over linear amplification demonstrated in controlled environments may not be maintained in situations where the hearing aid wearer controls the volume.
More Related Videos
06:04Systematic Hearing Performance Evaluation Process for Adolescents with Cochlear Implantation at Early Ages
Published on: March 24, 2023
07:00Electrically Evoked Stapedius Reflex Measurements in Cochlear Implantation and Its Application in the Postoperative Fitting Process
Published on: June 21, 2024
Related Concept Videos
Characteristics of OpAmp
Characteristics of Practical Op Amps
The ratio of differential gain to the common-mode gain is defined as the common-mode rejection ratio (CMRR). This ratio quantifies the ability of operational amplifiers (op-amps) to reject common-mode...
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
Second-order Op Amp Circuits
The analysis of such circuits follows a systematic approach, similar to the second-order RLC circuits. In practical scenarios, bulky inductors are rarely employed due to their size and weight. This means...
Op Amp AC Circuits
Design Example