Comparison of SFE with Soxhlet in the analyses of PCDD/PCDFs and PCBs in sediment

The efficiency of supercritical fluid extraction (SFE) for the isolation of polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) from sediments was investigated by comparing SFE with Soxhlet. Five sediments obtained from an international interlaboratory study were used as a test material. SFE was performed with an automatic system where extracted analytes were collected by solid-phase trapping using carbon mixed with Celite as an adsorbent. For the first time, SFE of the most toxic PCBs, coplanar PCBs, was studied with real sediment samples. The majority of PCBs investigated, a total of 38 congeners from tri- to decachlorinated, were quantitatively extracted from sediment by SFE with pure CO2 at pressure 400 atm and temperature 100 degrees C. Under these conditions a successful extraction was obtained also for PCDD/PCDFs except for hepta- and octachlorinated congeners. Copper powder added to the sediment efficiently prevented the transfer of sulfur from the sample during SFE. The TEQs of both PCDD/PCDFs and PCBs obtained by SFE corresponded well with those obtained by the Soxhlet-based method. The reproducibility of SFE was high for both groups.