Related Experiment Video
Updated: Sep 27, 2026

Determining the Mechanical Strength of Ultra-Fine-Grained Metals
Published on: November 22, 2021
Formation and relaxation of coherency strain in the nickel-base superalloy SC16
Haroldo Cavalcanti Pinto1, Giovanni Bruno
1Hahn-Meitner Institut, Glienicker Strasse 100, D-14109 Berlin, Germany.
Abstract:
An in situ study of the kinetics of relaxation of the gamma-gamma' lattice mismatch in the single-crystal Ni-base superalloy SC16 was carried out by means of high-energy synchrotron radiation diffraction. The high resolution achievable was exploited to measure the time variation of the gamma and gamma' lattice parameters during isothermal ageing at several temperatures, starting from the gamma' solvus point. On cooling from the solvus temperature (1523 K) the gamma' precipitate phase nucleates and grows following concurrent mechanisms. The variations of the gamma and gamma' peak position and integrated intensity could be followed by means of fundamental and superstructure reflections. At each temperature T < 1473 K the integrated intensity follows an Avrami time law. The gamma' Volume fraction increases as a function of time at each temperature. It increases with cooling, until saturation occurs at temperatures as low as 1075 K. The lattice mismatch follows an exponential time decay, while having larger values at high temperatures. The pArticles are born fully coherent, and the coherency strains the set-up. Over time, long-term ageing shows a stabilization of the misfit value, while the precipitates are supposed to lose their coherency to the matrix (within 3-4 h) and the strains relax.
More Related Videos
Related Concept Videos
Residual Stresses
Stress-Strain Diagram - Ductile Materials
Temperature Dependent Deformation
Residual Stresses in Bending
Mechanical Characteristics of Steel
The tension test is fundamental for determining tensile strength. In this test, a steel specimen is stretched using a gripping device until it breaks. The data collected during this test are used to...
Hooke's Law

