A reproducible porcine vertebral fracture for biomechanical testing of spinal fixation devices

To evaluate vertebral fracture fixation devices in the laboratory, it is necessary to produce identical and unstable fractures either in anatomic specimen or animal models. Consistent achievement of this goal has not been reported in the literature. This report presents a technique for the study of reproducibility for a particular vertebral fracture model. A precise anterior defect was created in a vertebra of each specimen drawn from a homogeneous population of mature sow spines. The spines were loaded to failure. Fracture reproducibility was shown by measurement of load and displacement, and confirmed by roentgenographic evaluation. The technique is easily applied to human specimens. Because there is a plethora of fracture fixation devices based on hooks, wires, or, more recently, plates and pedicle screws, the reliability of comparative testing of these devices in the laboratory requires an appropriate and reproducible fracture.