Synthesis, stability, and protonation studies of a self-complementary dodecamer containing the modified nucleoside...

The nucleoside 2'-deoxyzebularine (K) was incorporated into the self-complementary dodecamer 5'-CGTACGKGTACG-3' by solid-phase 2-cyanoethylphosphoramidite chemistry using dimethoxytrityl (DMT) as the 5'-hydroxyl protecting group. Standard synthesis cycles using trichloroacetic acid and short ammonia treatment (50 degrees C for 30 min) were found to be the optimal conditions to obtain the desired dodecamer with minimum acid and basic degradation of the acid- and base-sensitive 2-pyrimidinone residue. The protonation equilibria of the K nucleoside and of the dodecamer at 37 degrees C were studied by means of spectroscopically monitored titrations. For the K nucleoside, a pK(a) value of 3.13 +/- 0.09 was obtained. For the dodecamer, four acid-base species were found in the pH range 2-12, with pK(a) values of 9.60 +/- 0.07, 4.46 +/- 0.16, and 2.87 +/- 0.19. Melting experiments were carried out to confirm the proposed acid-base concentration profiles. Finally, kinetic experiments were also carried out at several pH values to evaluate the stability of the K nucleoside and of the dodecamer. An increased stability was shown by the K nucleoside when incorporated into the dodecamer. Multivariate methods based on both hard- and soft-modeling were applied for the analysis of spectroscopic data, allowing the estimation of concentration profiles and pure spectra.