The development of a continuous isothermal titration calorimetric method for equilibrium studies

A continuous isothermal titration calorimetry (cITC) method for microcalorimeters has been developed. The method is based on continuous slow injection of a titrant into the calorimetric vessel. The experimental time for a cITC binding experiment is 12-20 min and the number of data points obtained is on the order of 1000. This gives an advantage over classical isothermal titration calorimetry (ITC) binding experiments that need 60-180 min to generate 20-30 data points. The method was validated using two types of calorimeters, which differ in calorimetric principle, geometry, stirring, and way of delivering the titrant into the calorimetric vessel. Two different experimental systems were used to validate the method: the binding of Ba(2+) to 18-crown-6 and the binding of cytidine 2'-monophosphate to RNAse A. Both systems are used as standard test systems for titration calorimetry. Computer simulations show that the dynamic range for determination of equilibrium constants can be increased by three orders of magnitude compared to that of classical ITC, making it possible to determine high affinities. Simulations also show an improved possibility to elucidate the actual binding model from cITC data. The simulated data demonstrate that cITC makes it easier to discriminate between different thermodynamic binding models due to the higher density of data points obtained from one experiment.