Related Experiment Video
Updated: Aug 21, 2026

Protocol for the Evaluation of MRI Artifacts Caused by Metal Implants to Assess the Suitability of Implants and the Vulnerability of Pulse Sequences
Published on: May 17, 2018
MRI of hip prostheses using single-point methods: in vitro studies towards the artifact-free imaging of individuals
P Ramos-Cabrer1, J P M van Duynhoven, A Van der Toorn
1Department of Experimental in vivo NMR, Image Sciences Institute, University Medical Center, Utrecht, The Netherlands. ramos@mpin-koeln.mpg.de
Abstract:
Use of magnetic resonance imaging (MRI) in individuals with orthopedic implants is limited because of the large distortions caused by metallic components. As a possible solution for this problem, we suggest the use of single-point imaging (SPI) methods, which are immune to the susceptibility artifacts observed with conventional MRI methods. A further advantage of SPI, based on the fact that signal encoding is achieved in ultra-short times (as short as tens of microseconds), is that they enable the direct visualization of the polymeric elements of the implants, allowing the detection of possible implant failures. We present in vitro SPI images of polymeric sockets of two hip prostheses together with artifact-free images of gelatin phantoms containing their respective metallic stems. These data underscore the great potential of the SPI technique for obtaining artifact-free images of individuals with large metal implants.
Related Concept Videos
Magnetic Resonance Imaging
Imaging Studies I: CT and MRI
Description of the Procedures
Computed Tomography (CT) scan:
Computed Tomography (CT) scans use X-ray technology to generate detailed images of bones, organs, and tissues. During the scan, the patient lies on a moving table...
Imaging Studies for Cardiovascular System IV: CMRI
