[Analysis of composition and structure of sulfur compounds in residual oils by pyrolysis-gas chromatography]
Xiaolin Yan1, Quan Shi, Chunming Xu
1State Key Laboratory of Heavy Oil Processing, University of Petroleum, Beijing 102200, China.
Abstract:
Flash pyrolysis-gas chromatography has been used to investigate macromolecular sulphur in heavy oil. The influences of pyrolysis time and pyrolysis temperature have been studied and the analytical methods of pyrolysis were set up. Sulfur-containing products were identified by comparing with reference data and semi-quantified by a pulsed flame photometric detector (PFPD). The investigation conducted on Dagang, Gudao, Qianguo, Russia and mixed Russia-Daqing residual oils using pyrolysis-gas chromatography showed that the contents and composition of sulphur compounds demonstrated various characters in different pyrolysates of residual oils.
More Related Videos
11:44Qualitative Characterization of the Aqueous Fraction from Hydrothermal Liquefaction of Algae Using 2D Gas Chromatography with Time-of-flight Mass Spectrometry
Published on: March 6, 2016
07:49On-line Analysis of Nitrogen Containing Compounds in Complex Hydrocarbon Matrixes
Published on: August 5, 2016
Related Concept Videos
Structure and Nomenclature of Thiols and Sulfides
Preparation and Reactions of Sulfides
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography: Types of Detectors-II
Supercritical Fluid Chromatography
SFC utilizes a supercritical fluid mobile phase,...
