Related Experiment Video
Updated: Aug 18, 2026

Preparing an Isotopically Pure 229Th Ion Beam for Studies of 229mTh
Published on: May 3, 2019
LiF:Mg,Ti (MTT) TL detectors optimised for high-LET radiation dosimetry
P Bilski1, M Budzanowski, P Olko
1Health Physics Lab, Institute of Nuclear Physics, Kraków, Poland. pawel.bilski@ifj.edu.pl
Abstract:
The properties of LiF:Mg,Ti (distributed as, e.g., TLD-100 or MTS-N), the most frequently used thermoluminescent detector, have been optimised for measurements of sparsely ionizing radiation (gamma rays), typically encountered in radiation protection or clinical dosimetry. However, these detectors need also to be applied in conditions of mixed-field dosimetry with a high-LET component, such as those encountered in heavy ion beams or in space. At the Institute of Nuclear Physics in Kraków a new type of LiF:Mg,Ti detector (named MTT) has been recently developed through modification of its dopant composition. This composition is intended to increase the detection efficiency after a dose of high-LET radiation. The concentration of dopants in the MTT material is: CMg=50 ppm, and CTi=120 ppm, i.e. about a three times less of magnesium and about 10 times more of titanium content, compared with the standard MTS-N. The MTT TL detectors feature an increased relative efficiency to high-LET radiation, which for 5 MeV alpha-particles is about twice that of standard LiF:Mg,Ti. The response of MTT detectors has been studied in charged particle beams of the HIMAC accelerator in Chiba, Japan and in Dubna, Russia. The main foreseen application of MTT detectors are dose measurements in space. The dose after high-LET exposure can be estimated from the difference of the response of MTS and MTT detectors. In the near future MTT detectors will be applied in the "Matroshka" experiment. Within this experiment a specially constructed human phantom will be exposed in free space (outside the International Space Station) for 1 year. The phantom will incorporate a few thousand measuring points enabling radiation doses to particular organs to be determined.
More Related Videos
14:19A Basic Positron Emission Tomography System Constructed to Locate a Radioactive Source in a Bi-dimensional Space
Published on: February 1, 2016
07:31Characterization of Recombination Effects in a Liquid Ionization Chamber Used for the Dosimetry of a Radiosurgical Accelerator
Published on: May 9, 2014
Related Concept Videos
Positron Emission Tomography
One of the main requirements of a PET scan is a positron-emitting radioisotope, which is produced in a cyclotron and then attached to a substance used by the part of the body being...
Tandem Mass Spectrometry
Imaging Studies II: Positron Emission Tomography and Scintigraphy
Fundamental Principles of PET