Related Experiment Video
Updated: Aug 16, 2026

Determining the Chemical Composition of Corrosion Inhibitor/Metal Interfaces with XPS: Minimizing Post Immersion Oxidation
Published on: March 15, 2017
[Effect of flue gas conditions on NO oxidation process by DC corona radical shower]
Zu-liang Wu1, Xiang Gao, Ming-bo Li
1Clean Energy and Environment Engineering Key Lab of Ministry of Education, Zhejiang University, Hangzhou 310027, China.
Abstract:
Using an air-H2O DC corona radical shower system, the influences of reside time of flue gas in the reactor, velocity of flue gas and NO concentration on NO oxidation process were studied. The results show that the increasing velocity of flue gas can restrain corona development and the increasing NO concentration can make discharge more easy. The reside time of flue gas in the reactor has less effect on the NO oxidation. The NO oxidation rate increased only from 54.5% to 57.6% at 2 W input power when the reside time of flue gas in the reactor increased from 8.5 s to 34.2 s. However, the velocity of flue gas has important effect on the NO oxidation. At 1.7 W x h/m3 energy density, when the velocity of flue gas increased from 1.4 cm/s to 6.3 cm/s, the NO oxidation rate dropped from 60.0% to 38.6% and the energy yield also falled from 20.8 g/(kW x h) to 13.3 g/(kW x h). Under the certain flux of humid air, NO initial concentration has a best value, which was about 100 x 10(-6) in this experiment.
Related Concept Videos
Radical Autoxidation
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...

