Small-slope simulation of acoustic backscatter from a physical model of an elastic ocean bottom

An underwater acoustic experiment with a two-dimensional rough interface, milled from a slab of PVC, was performed at a tank facility. The purpose was to verify the predictions of numerical models of acoustic rough surface scattering, using a manufactured physical model of an ocean bottom that featured shear effects, nonhomogeneous roughness statistics, and root-mean-square roughness amplitude on the order of the acoustic wavelength. Predictions of the received time series and interface scattering strength in the 100-300 kHz band were obtained from the Bottom Reverberation from Inhomogeneities and Surfaces-Small-Slope Approximation (BORIS-SSA) numerical scattering model. The predictions were made using direct measurements of scattering model inputs-specifically, the geoacoustic properties from laboratory analysis of material samples and the grid of surface heights from a touch-trigger probe. BORIS-SSA predictions for the amplitude of the received time series were shown to be accurate with a root-mean-square residual error of about 1 dB, while errors for the scattering strength prediction were higher (2-3.5 dB). The work is part of an ongoing effort to use physical models to examine a variety of acoustic scattering and propagation phenomena involving the ocean bottom.