Related Experiment Video
Updated: Jul 5, 2026

Scalable Step-by-Step Approach of Sustainable Bioplastic Production from Food Waste
Published on: July 18, 2025
Production and recovery process of polyhydroxybutyrate (PHB) from waste activated sludge
Kalyani Mahapatra1, M Suresh Kumar, T Chakrabarti
1Environmental Biotechnology Division, National Environmental Engineering Research Institute, Nehru Marg, Nagpur, India.
Abstract:
Polyhydroxybutyrate (PHB) is bacterial storage polyester, currently receiving much attention because of its biodegradable potential. Production of microbial polymers is expensive due to supplementary carbon source and downstream processing cost. The present study aimed at reducing the fermentation carbon source cost by using waste activated sludge and wastewater, and evaluating the use of proper solvent for the recovery of PHB from activated sludge to minimize the downstream cost. To improve the recovery process efficiency, different strategies for the extraction and recovery of the polymer from the waste activated sludge were applied. The maximum solubility of PHB (80%) was observed in chloroform, and precipitation with methanol (95%) was observed. Impurities interference in the PHB recovery process was also studied. By using these optimized recovery processes with optimized C:N ratio 10, the maximum product recovery was observed to be 62.3% (w/w). The results are presented and discussed in this paper.
Related Concept Videos
Bioplastics
Microbial Bioremediation of Plastics
Production of Organic Acids
Biological Treatment of Effluent and Waste Water
Bioremediation
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...

