Related Experiment Video
Updated: Jun 28, 2026

Analysis of Contact Interfaces for Single GaN Nanowire Devices
Published on: November 15, 2013
Interface charge induced p-type characteristics of aligned Si(1-x)Gex nanowires
Han-Kyu Seong1, Eun-Kyoung Jeon, Myoung-Ha Kim
1Department of Materials Science and Engineering, Yonsei University, Seoul 120-749, Korea.
Abstract:
This study reports the electrical transport characteristics of Si(1-x)Gex (x=0-0.3) nanowires. Nanowires with diameters of 50-100 nm were grown on Si substrates. The valence band spectra from the nanowires indicate that energy band gap modulation is readily achievable using the Ge content. The structural characterization showed that the native oxide of the Si(1-x)Gex nanowires was dominated by SiO2; however, the interfaces between the nanowire and the SiO2 layer consisted of a mixture of Si and Ge oxides. The electrical characterization of a nanowire field effect transistor showed p-type behavior in all Si(1-x)Gex compositions due to the Ge-O and Si-O-Ge bonds at the interface and, accordingly, the accumulation of holes in the level filled with electrons. The interfacial bonds also dominate the mobility and on- and off-current ratio. The large interfacial area of the nanowire, together with the trapped negative interface charge, creates an appearance of p-type characteristics in the Si(1-x)Gex alloy system. Surface or interface structural control, as well as compositional modulation, would be critical in realizing high-performance Si(1-x)Gex nanowire devices.
More Related Videos
09:14Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices
Published on: December 7, 2017
08:12Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
Related Concept Videos
P-N junction
Types of Semiconductors
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...