Related Experiment Video
Updated: Jun 21, 2026

Tactile Vibrating Toolkit and Driving Simulation Platform for Driving-Related Research
Published on: December 18, 2020
Comparison of manual vs. speech-based interaction with in-vehicle information systems
Jannette Maciej1, Mark Vollrath
1Department of Engineering and Traffic Psychology, Technische Universität Braunschweig, D-38106 Braunschweig, Germany. j.maciej@tu-braunschweig.de
Abstract:
This study examined whether speech-based interfaces for different in-vehicle-information-systems (IVIS) reduce the distraction caused by these systems. For three frequently used systems (audio, telephone with name selection, navigation system with address entry and point of interest selection) speech, manual control and driving without IVIS (baseline) were compared. The Lane Change Task was used to assess driving performance. Additionally, gaze behavior and a subjective measure of distraction were analyzed. Speech interfaces improved driving performance, gaze behavior and subjective distraction for all systems with the exception of point-of-interest entry. However, these improvements were overall not strong enough to reach the baseline performance level. Only in easy segments of the driving task the performance level was comparable to baseline. Thus, speech-based IVIS have to be further developed to keep the cognitive complexity at an adequate level which does not disturb driving. However, looking at the benefits, speech control is a must for the car of the future.
Related Concept Videos
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The direction...
Multi-input and Multi-variable systems
In the absence of...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Design Example
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...
Control Systems
At the heart...