Related Experiment Video
Updated: Jun 17, 2026

Extraction and Characterization of Surfactants from Atmospheric Aerosols
Published on: April 21, 2017
Solid-phase extraction of organic compounds in atmospheric aerosol particles collected with the particle-into-liquid
Jevgeni Parshintsev1, Tuulia Hyötyläinen, Kari Hartonen
1Laboratory of Analytical Chemistry, Department of Chemistry, P.O. Box 55, FI-00014, University of Helsinki, Finland.
Abstract:
Atmospheric aerosol particles, collected with the particle-into-liquid sampler at SMEARII station in Finland in mid-August 2007, were analysed for biogenic acids. The sample pretreatment method, comprising solid-phase extraction with anion exchange and hydrophilic-lipophilic balance materials, was optimized. Extraction efficiencies of solid-phase extraction from 10 and 20ml samples were about 100%, with average relative standard deviation of 8.9%, in concentration range from 12.5 to 50ng/ml of the acid. Extraction of aldehydes was less successful, with efficiencies from 69 to 163% and average 10% deviation. Pretreated samples were analysed by reversed phase high performance liquid chromatography with ion trap mass spectrometric detection. Limits of detection achieved for organic acids with the analytical procedure developed ranged from 9 to 27microg/l of extracted sample, while limits of quantitation were from 31 to 90microg/l. Oxidation with ozone was used for the preparation of the acid of beta-caryophyllene (beta-caryophyllinic acid), which was also studied in aerosol samples. MS(2) experiments were used to confirm the identification of trans-pinic, trans-pinonic and beta-caryophyllinic acids. Azelaic, hexadecanoic, cis-pinonic, and cis- and trans-pinic acids were quantitated in the samples with use of authentic standards, while the concentrations of trans-pinonic and beta-caryophyllinic acids were determined with cis-pinonic acid as surrogate. Also, the contribution of beta-caryophyllene oxidation products to aerosol organic carbon was evaluated. Aldehydes could not be analysed in real samples due to the insufficient extraction. The particle-into-liquid sampler proved to be suitable for the collection of aerosol particles for the elucidation of daily and diurnal variation of selected species. The optimized sample pretreatment, together with the analysis method, offer a promising approach for the study of aerosol chemical composition, where artifact formation is minimal and time resolution is good.
More Related Videos
11:17A Simple Fractionated Extraction Method for the Comprehensive Analysis of Metabolites, Lipids, and Proteins from a Single Sample
Published on: June 1, 2017
08:10Fizzy Extraction of Volatile Organic Compounds Combined with Atmospheric Pressure Chemical Ionization Quadrupole Mass Spectrometry
Published on: July 14, 2017
Related Concept Videos
Sample Preparation for Analysis: Overview
Bulk or large solid samples are typically reduced in size using grinding, crushing, or milling techniques to increase the...
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
High-Performance Liquid Chromatography: Types of Detectors
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
High-Performance Liquid Chromatography: Introduction
In HPLC, two phases play a critical role in the separation process:
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...