Related Experiment Video

Updated: Jun 16, 2026

Measuring Spatially- and Directionally-varying Light Scattering from Biological Material
11:57

Measuring Spatially- and Directionally-varying Light Scattering from Biological Material

Published on: May 20, 2013

Specular aspheric surface to obtain a specified irradiance from discrete or continuous line source radiation: design

D G Burkhard, D L Shealy

    Applied Optics
    |February 16, 2010
    PubMed

    More Related Videos

    Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics09:00

    Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics

    Published on: October 27, 2017

    Microfabrication of Implantable Optics Integrated in a Microstructured Imaging Window for Advanced In Vivo Imaging07:14

    Microfabrication of Implantable Optics Integrated in a Microstructured Imaging Window for Advanced In Vivo Imaging

    Published on: April 11, 2025

    Related Concept Videos

    Atomic Absorption Spectroscopy: Radiation and Light Sources01:13

    Atomic Absorption Spectroscopy: Radiation and Light Sources

    Atomic absorption spectroscopy (AAS) relies on the Beer-Lambert law, which requires that the radiation source emits a narrow range of wavelengths to match the absorption characteristics of the analyte atom. The primary criteria for choosing an appropriate radiation source in AAS is to provide a precise and intense emission at specific wavelengths that will allow accurate detection of the analyte.
    Two common narrow-range 'line' sources used in AAS are hollow-cathode lamps (HCLs) and...
    Surface Area Calculations01:22

    Surface Area Calculations

    Surface area calculations for a graph z = f(x, y) are fundamental in engineering applications involving curved structures such as satellite dishes. A parabolic dish reflects communication signals efficiently, but engineers must determine its exact curved surface area to estimate coating materials, fabrication costs, and structural requirements. Since the rim of the dish forms a circular boundary, the surface area is calculated over a circular domain in the xy-plane.Parametric Representation of...
    Atomic Emission Spectroscopy: Instrumentation01:22

    Atomic Emission Spectroscopy: Instrumentation

    The instrumentation of atomic emission spectrometry (AES) involves various components, including atomization devices that convert samples into gas-phase atoms and ions. There are two main types of atomization devices: continuous and discrete atomizers.  Continuous atomizers, like plasmas and flames, introduce samples in a constant stream, while discrete atomizers inject individual samples using syringes or autosamplers. The most common discrete atomizer is the electrothermal atomizer.
    Polar Coordinates: Problem Solving01:27

    Polar Coordinates: Problem Solving

    Directional radiation patterns are central to antenna analysis, as they illustrate how signal strength varies with direction. These patterns are often modeled using polar plots, where the radial distance from the origin represents signal intensity at a given angle. A commonly used idealized form is the four-lobed rose curve, which captures the concept of directional beams in a simplified mathematical form.The four-lobed rose curve, described by r = cos⁡(2θ), features four symmetric lobes, each...
    Atomic Absorption Spectroscopy: Instrumentation01:22

    Atomic Absorption Spectroscopy: Instrumentation

    An atomic absorption spectrophotometer (AAS) comprises several components: a radiation source, an atomizer, a monochromator, and a detector. The radiation source can be a hollow-cathode lamp (HCL) or an electrodeless-discharge lamp (EDL), both of which provide a narrow emission line of the required wavelength. However, some instruments use continuum sources and high-resolution monochromators to achieve a narrow range of radiation.
    The atomizer used in AAS can be either a flame atomizer or an...
    Parametric Surfaces01:30

    Parametric Surfaces

    A parametric surface in three-dimensional space is defined through a vector-valued function\begin{equation*}\mathbf{r}(u, v) = x(u, v)\mathbf{i} + y(u, v)\mathbf{j} + z(u, v)\mathbf{k}\end{equation*}where u and v are parameters within a specified domain D in the uv-plane. The functions x(u, v), y(u, v), and z(u, v) define the coordinates of points on the surface. As u and v vary over D, the position vector r(u, v) traces a continuous surface in space. This parametric representation is essential...