Compatible volumetric 3-D TV systems: a proposal

Related Experiment Video

Updated: Jun 14, 2026

Novel 3D/VR Interactive Environment for MD Simulations, Visualization and Analysis
11:29

Novel 3D/VR Interactive Environment for MD Simulations, Visualization and Analysis

Published on: December 18, 2014

K Balasubramonian, N Nithiyanandam, K P Rajappan

    Applied Optics
    |April 8, 2010
    PubMed

    More Related Videos

    Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow13:02

    Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow

    Published on: February 27, 2016

    Related Concept Videos

    Uniform Depth Channel Flow: Problem Solving01:18

    Uniform Depth Channel Flow: Problem Solving

    To calculate the flow rate for a trapezoidal channel, first, identify the bottom width, side slope, and flow depth of the channel. The cross-sectional area (A) corresponding to the depth of flow (y), channel bottom width (B), and side slope (θ) is determined by:Next, calculate the wetted perimeter, which includes the bottom width and the sloped side lengths in contact with the water. Using the values of the cross-sectional area and the wetted perimeter, determine the hydraulic radius by...
    Uniform Depth Channel Flow01:27

    Uniform Depth Channel Flow

    Uniform depth channel flow keeps fluid depth consistent along channels such as irrigation canals. In natural channels, such as rivers, approximate uniform flow is often assumed. This condition occurs when the channel’s bottom slope matches the energy slope, balancing potential energy lost from gravity with head loss due to shear stress. This balance prevents depth changes along the channel length, resulting in a steady, uniform flow.Uniform flow in open channels with a constant cross-section...
    Computed Tomography01:10

    Computed Tomography

    Tomography refers to imaging by sections. Computed tomography (CT) is a non-invasive imaging technique that uses computers to analyze several cross-sectional X-rays to reveal minute details about structures in the body.
    The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...