Related Experiment Video
Updated: May 1, 2026

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 16, 2014
Static and low order anti-windup synthesis for cascade control systems with actuator saturation: an application to
Muhammad Rehan1, Abrar Ahmed, Naeem Iqbal
1Systems and Control Research Group, Department of Electrical Engineering, PIEAS, Islamabad, Pakistan. rehanqau@gmail.com
Abstract:
In this paper, a new framework for designing static and low order anti-windup compensator (AWC) for industrial cascade control systems with actuator saturation constraint is presented. Based on less conservative block diagonal quadratic Lyapunov function, sector boundedness, decoupled architecture, L(2) norm reduction and cascade loop compensation, linear matrix inequalities are developed which guarantee stability and suitable performance for overall closed-loop system. Static AWC parameters are obtained by comparing the full order AWC architecture with generalized architecture for cascade control system. Low order AWC is designed by sub-optimal approach in which AWC weights are tuned by designer. Anti-windup compensator is divided into inner and outer loop compensators which compensate the effect of saturation at each level. It is observed that the proposed methodology is less conservative than the traditional AWC schemes when applied to cascade control systems. The proposed scheme is successfully tested experimentally on a temperature-based process control system and results are outlined.
Related Concept Videos
Control Systems
At the heart...
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Time and frequency -Domain Interpretation of PI Control
Acting as a low-pass filter, the PI controller slows the system's response and extends settling times. This requires...

