Related Experiment Video
Updated: Jun 10, 2026

11:08
Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
Published on: November 30, 2012
High-isolation optical isolator using a BiCalnVIG single crystal
Applied Optics
|August 21, 2010
Abstract:
To the best of our knowledge this is the first time a new optical isolator has been developed that uses BiCaInVIG, a non-rare-earth iron garnet. The device has high isolation > 40 dB with an insertion loss of 1.0 dB at 1.3-microm wavelength and > 43 dB with 1.1 dB at 1.52-microm wavelength, including Fresnel reflection losses of ~0.8 dB for two polarizers. In addition, the device is inexpensive. In order to adjust maximum isolation when the isolator is assembled, a theoretical basis is presented, and the calculated values are in good agreement with the experimental results.

